Residential Technical Catalog - 25

TECHNICAL DATA SHEETS RESIDENTIAL

Pavers, slabs, walls and steps

PRESTIGE TM 60 SLAB PREMIUM FINISHES

PRESTIGE TM 60 SLAB | 40X60

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

COLORS

DIMENSIONS (IN) 2 3/8 x 15 3/4 x 23 5/8

Grenart Premium finish Grenart Premium finish Smooth Premium finish Smooth Premium finish

PTR-546G-11 PTR-546G-55 PTR-546L-11 PTR-546L-55

Granite gray Anthracite Granite gray Anthracite

A

A 6 x 40 x 60

Unit/Surface

4,17 / m 2 0,96 m 2 10,56 m 2

0,39 / ft 2 10,33 ft 2 113,63 ft 2

Qty/row Qty/cube

11 rows

Weight/unit avg. Weight/cube

37 kg

81 lb

1591 kg

3508 lb

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

17,65 m 2

190,0 ft 2

PRESTIGE TM 60 SLAB | 60X60

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

COLORS

DIMENSIONS (IN) 2 3/8 x 23 5/8 x 23 5/8

Grenart Premium finish Grenart Premium finish Smooth Premium finish Smooth Premium finish

PTR-566G-11 PTR-566G-55 PTR-566L-11 PTR-566L-55

Granite gray Anthracite Granite gray Anthracite

B 6 x 60 x 60

B

Unit/Surface

2,78 / m 2

0,26 / ft 2 7,75 ft 2 85,25 ft 2 123 lb 2646 lb

Qty/row Qty/cube

0,72 m 2

7,92 m 2

11 rows

Weight/unit avg. Weight/cube

56 kg

1200 kg

Sold separately

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

22,06 m 2

237,5 ft 2

COLORS

GRENART FINISH

SMOOTH FINISH

Colors with solar reflectance indices contributing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

Granite gray

Anthracite

Granite gray

Anthracite

PATTERNS

Pattern 1 Checker pattern (65 x 600 x 600)

Pattern 3 Runner pattern (65 x 600 x 600)

Pattern 2 Runner pattern (65 x 400 x 600)

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of slabs resulting from an installation according to these laying patterns.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

PRESTIGE TM 60 SLAB PREMIUM FINISHES

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Flexural (transverse) strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

5 MPa (725 psi)

Prestige 60 slab

CSA A231.1

6 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CITADIN TM 60 SLAB REGULAR OR SMOOTH PREMIUM FINISHES

CITADIN TM 60 SLAB - 400 x 600

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

Specifications Regular finish

Codes

Standard Colors

A

DIMENSIONS (IN) 2 3/8 x 15 3/4 x 23 5/8

PTR-446R-15

Gray and charcoal Deluxe Colors

6 x 40 x 60 4,17 / m 2

Unit/Surface Qty/row Qty/cube Weight/unit Weight/cube

0,39 / ft 2 10,33 ft 2 113,63 ft 2

PTR-446R-02 PTR-446R-21 PTR-446R-24

Ice gray

0,96 m 2 10,56 m 2

Ivory beige

11 rows

Travertine beige

37 kg

81 lb

1591 kg

3508 lb

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

17,65 m 2

190,0 ft 2

CITADIN TM 60 SLAB - 600 x 600

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

Specifications Regular finish

Codes

Standard Colors

DIMENSIONS (IN) 2 3/8 x 23 5/8 x 23 5/8

PTR-466R-15

Gray and charcoal Deluxe Colors

6 x 60 x 60 2,78 / m 2

B

Unit/Surface Qty/row Qty/cube Weight/unit Weight/cube

0,26 / ft 2 7,75 ft 2 85,25 ft 2 123 lb 2646 lb

PTR-466R-02 PTR-466R-21 PTR-466R-24

Ice gray

0,72 m 2

Ivory beige

7,92 m 2

11 rows

Travertine beige

56 kg

1200 kg

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

22,06 m 2

237,5 ft 2

COLORS

Colors with solar reflectance indices contributing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

Gray and charcoal

Ice gray

Ivory beige

Travertine beige

PATTERNS

Pattern 1 Checker pattern (60 x 600 x 600)

Pattern 3 Runner pattern (60 x 600 x 600)

Pattern 2 Runner pattern (60 x 400 x 600)

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of slabs resulting from an installation according to these laying patterns.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CITADIN TM 60 SLAB REGULAR FINISH

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Flexural (transverse) strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

5 MPa (725 psi)

Citadin 60 slab

CSA A231.1

6 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

Cover snow removal tools with Teflon or neoprene protectors to minimize the risk of damage from scratches.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CITADIN ® M60 SLAB REGULAR OR SMOOTH PREMIUM FINISHES

CITADIN ® M60 SLAB

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

Specifications Regular finish

Codes

Standard Colors

DIMENSIONS (IN) 2 3/8 x 6 3/8 x 12 13/16 2 3/8 x 12 13/16 x 12 13/16 2 3/8 x 12 13/16 x 19 3/16

PTR-411R-10 Gray PTR-411R-15 Gray and charcoal Deluxe Colors PTR-411R-02 Ice gray PTR-411R-03 Gray onyx PTR-411R-24 Travertine beige PTR-411R-50 Black

A

A 6 x 16,3 x 32,5 B 6 x 32,5 x 32,5 C 6 x 32,5 x 48,8

Unit/Surface

9,92 / m 2 1,11 m 2 12,21 m 2

0,92 / ft 2 11,94 ft 2 131,34 ft 2

B

Qty/row Qty/cube

11 rows

Weight/unit avg. Weight/cube

15 kg

33 lb

PTR-411L-21

Ivory beige

Smooth Premium finish

C

1696 kg

3739 lb

Sold together

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

7,04 m 2

75,8 ft 2

SUPRA CITADIN ® M60 SLAB

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS Regular finish

CODES

STANDARD COLORS

DIMENSIONS (IN) 2 3/8 x 19 3/16 x 32

PTR-412R-10 PTR-412R-15

Gray

D 6 x 48,8 x 81,3

Gray and charcoal DELUXE COLORS

D

0,23 / ft 2 8,52 ft 2 93,78 ft 2 125 lb 2728 lb

Unit/Surface

2,52 / m 2 0,79 m 2 8,71 m 2

Qty/row Qty/cube

PTR-412R-02 Ice gray PTR-412R-03 Gray onyx PTR-412R-24 PTR-412R-50 Black

11 rows

Weight/unit avg. Weight/cube

57 kg

Travertine beige

1240 kg

PTR-412L-21

Ivory beige

Smooth Premium finish

Sold separately

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

13,46 m 2

144,9 ft 2

CITADIN ® M60 SMALL RECTANGLE SLAB

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS Regular finish

CODES

COLORS

DIMENSIONS (IN) 2 3/8 x 6 3/8 x 12 13/16

PTR-413R-10

Gray DELUXE COLORS Anthracite brown

E

E 6 x 16,3 x 32,5

Unit/Surface

18,93 / m 2 1,11 m 2 12,21 m 2

1,76 / ft 2 11,94 ft 2 131,34 ft 2

PTR-413R-25

Qty/row Qty/cube

PTR-413R-50 Black

11 rows

PTR-413L-21

Ivory beige

Smooth Premium finish

Weight/unit avg. Weight/cube

7,5 kg 1696 kg

16 lb

3739 lb

Sold separately

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

4,82 m 2

51,9 ft 2

When placing joint filler sand, we recommend using a Teflon-coated vibrating plate on pavers or slabs to protect stone surfaces. Also we recommend cover snow removal tools with Teflon or neoprene type protectors to minimize the risk of damage from scratches or concrete chips.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

RECOUVREMENT CITADIN ® 45

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

CODES

STANDARD COLOR Gray and charcoal DELUXE COLORS

DIMENSIONS (IN) 1 3/4 x 15 3/4 x 15 3/4

PMC-411R-15

4,5 x 40 x 40

Surface/units

0,16 m 2 6 units 48 units

1,72 ft 2

PMC-411R-02 PMC-411R-21 PMC-411R-24 PMC-411R-50

Ice gray

Qty/row Qty/cube

Ivory beige

8 rows

Travertine beige

Weight/unit avg. Weight/cube

16 kg

32 lb

Black

803 kg

1767 lb

Sold separately

COLORS

Gray and charcoal

Ice gray

Gray onyx

Black

Ivory beige

Travertine beige

Gray

Colors with solar reflectance indices contributing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

Anthracite brown

PATTERNS

Pattern 6 Modular pattern

Pattern 1 Runner pattern

Pattern 2 Modular pattern

Pattern 3 Runner pattern

Pattern 4 Supra checker pattern

Pattern 5 Modular pattern

3% Citadin M60 (60x163x325) 6% Citadin M60 (60x325x325) 7% Citadin M60 (60x325x488) 83% Supra Citadin M60 (60x488x813)

16% Citadin M60 (60x163x325) 32% Citadin M60 (60x325x325) 36% Citadin M60 (60x325x488) 15% Supra Citadin M60 (60x488x813

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of slabs resulting from an installation according to these laying patterns.

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Flexural (transverse) strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

5 MPa (725 psi)

Citadin M60 slab

CSA A231.1

6 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

RICHELIEU TM M60 SLAB CARVED FINISH

RICHELIEU TM M60 SLAB

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

STANDARD COLORS

DIMENSIONS (IN) 2 3/8 x 6 3/8 x 12 13/16 2 3/8 x 12 13/16 x 12 13/16 2 3/8 x 12 13/16 x 19 3/16

PTR-310R-13 PTR-310R-15 PTR-310R-35 PTR-310R-02 PTR-310R-24 PTR-310R-50

Sandy gray

A

A 6 x 16,3 x 32,5 B 6 x 32,5 x 32,5 C 6 x 32,5 x 48,8

Gray and charcoal Ashen beige DELUXE COLORS

Unit/Surface

9,92 / m 2 1,11 m 2 12,21 m 2

0,92 / ft 2 11,94 ft 2 131,34 ft 2

Ice gray

B

Qty/row Qty/cube

Travertine beige

11 rows

Black

Weight/unit avg. moy. 15 kg

33 lb

Weight/cube

1696 kg

3739 lb

C

Sold together

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

7,04 m 2

75,8 ft 2

SUPRA RICHELIEU TM M60 SLAB

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

STANDARD COLORS

DIMENSIONS (IN) 2 3/8 x 19 3/16 x 32

PTR-312R-13 PTR-312R-15

Sandy gray

D 6 x 48,8 x 81,3

Gray and charcoal DELUXE COLORS

0,23 / ft 2 8,52 ft 2 93,78 ft 2 125 lb 2728 lb

Unit/Surface

2,52 / m 2 0,79 m 2 8,71 m 2

D

Qty/row Qty/cube

PTR-312R-02 PTR-312R-24

Ice gray

11 rows

Travertine beige

Weight/unit avg. Weight/cube

57 kg

1240 kg

Sold separately

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

13,46 m 2

144,9 ft 2

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

RICHELIEU TM M60 SLAB CARVED FINISH

COLORS

Black

Sandy gray

Ice gray

Travertine beige

Gray and charcoal

Ashen beige

Colors with solar reflectance indices contributing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

PATTERNS

Pattern 6 Modular pattern 3% Richelieu M60 (60 x 163 x 325) 6% Richelieu M60 (60 x 325 x 325) 7% Richelieu M60 (60 x 325 x 488) 83% Supra Richelieu M60 (60 x 488 x 813)

Pattern 5 Modular pattern 16% Richelieu M60 (60 x 163 x 325) 32% Richelieu M60 (60 x 325 x 325) 36% Richelieu M60 (60 x 325 x 488) 15% Supra Richelieu M60 (60 x 488 x 813)

Pattern 1 Supra checker pattern

Pattern 3 Supra runner pattern

Pattern 4 Modular pattern

Pattern 2 Runner pattern

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of slabs resulting from an installation according to these laying patterns.

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Flexural (transverse) strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

5 MPa (725 psi)

Richelieu M60 slab

CSA A231.1

6 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

LOTUS TM STONE PATINART FINISH

LOTUS TM STONE

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

COLORS

DIMENSIONS (IN) 2 x 12-15 x 17-25

PTR-100P-15 PTR-100P-24

Gray and charcoal Travertine beige

5 x 30-38 x 43-63

0,87 / ft 2

Units/Surface Surface/unit Surface/cube Weight/unit avg. Weight/cube Qty/cube

9,36 / m 2

1,15 ft 2 69 ft 2

0,11 m 2 6,41 m 2 12,5 kg 782 kg 60

10 rows 27,6 lb 1724 lb

6 different shapes for a more natural look. Blend well with Sutton wallstone and Appalachian Stones.

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

10,52 m 2

113,2 ft 2

COLORS

Gray and charcoal

Travertine beige

PATTERN

Random pattern

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of stones resulting from an installation according to these laying patterns.

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Flexural (transverse) strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

5 MPa (725 psi)

Lotus stone

CSA A231.1

6 % maximum

• 225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles • 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CLASSIC SLAB REGULAR FINISH

CLASSIC SLAB

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODE

COLOR

DIMENSIONS (IN) 1 3/4 x 15 3/4 x 15 3/4

PTR-500R-15

Gray and charcoal

4,5 x 40 x 40

Surface/units Unit/Surface Weight/unit avg. Weight/cube Qty/cube

0,16 m 2 6,35 / m 2 72 units

1,7 ft 2

0,59 / ft 2 6 rows 35,2 lb 2599 lb

16,0 kg 1181 kg

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

19,63 m 2

211,3 ft 2

COLOR

Gray and charcoal

PATTERN

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of slabs resulting from an installation according to these laying patterns.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

PATIO SLAB REGULAR FINISH

PATIO SLAB

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

CODES

COLORS

DIMENSIONS (IN) 1 3/4 x 15 3/4 x 15 3/4

PTR-400R-10

Gray

4,5 x 40 x 40

Surface/units Unit/Surface Weight/unit avg. Weight/cube Qty/cube

0,16 m 2 6,35 / m 2 72 units

1,7 ft 2

0,59 / ft 2 6 rows 35,2 lb 2599 lb

16,0 kg 1181 kg

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

19,63 m 2

211,3 ft 2

COLORS

Gray

PATTERN

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of slabs resulting from an installation according to these laying patterns.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CHAMPLAIN ® SLAB REGULAR FINISH

CHAMPLAIN ® SLAB

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

COLORS

DIMENSIONS (IN) 1 9/16 x 11 5/8 x 11 5/8

PTR-300R-10 PTR-300R-35

Gray

4 x 29,5 x 29,5

Beige and charcoal*

Unit/Surface No. of units

0,09 m 2 11,5 / m 2 144 units

0,94 ft 2 1,07 / ft 2 12 rows 17,6 lb 2599 lb

* Products available while stocks last

Qty/cube

Weight/unit avg. Weight/cube

8,0 kg 1181 kg

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

9,98 m 2

107,4 ft 2

COLORS

Beige and charcoal

Gray

PATTERNS

Pattern 1 Checker pattern

Pattern 2 Runner pattern

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of slabs resulting from an installation according to these laying patterns.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

PRESTIGE TM 60 COPING GRENART AND SMOOTH FINISHES

BULLNOSE COPING

HEIGHT/DEPTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS Grenart finish Grenart finish

CODES

COLORS

DIMENSIONS (IN) 2 3/8 x 11 13/16 x 23 5/8

PBP-260J-11 PBP-260J-55

Granite gray Anthracite

6 x 30 x 60 1,67 un/ l.m.

Unit/Lenght Length/row Length/cube

0,51 un/ l.ft

3,6 l.m. 18 l.m. 30 units

11,81 l.ft 59,05 l.ft 5 rows

Sold separately

Qty/cube

Weight/unit avg. Weight/cube

28 kg 877 kg

62 lb

1930 lb

STRAIGHT COPING / GROUND FACE

HEIGHT/DEPTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS Grenart finish Grenart finish Smooth finish Smooth finish

CODES

COLORS

DIMENSIONS (IN) 2 3/8 x 11 13/16 x 23 5/8

PBP-536J-11 PBP-536J-55 PBP-536L-11 PBP-536L-55

Granite gray Anthracite Granite gray Anthracite

6 x 30 x 60 1,67 un/ l.m.

Unit/Lenght Length/row Length/cube

0,51 un/ l.ft

3,6 l.m. 18 l.m. 30 units

11,81 l.ft 59,05 l.ft 5 rows

Qty/cube

Sold separately

Weight/unit avg. Weight/cube

28 kg 877 kg

62 lb

1930 lb

COLORS

GRENART FINISH

SMOOTH FINISH

Granite gray

Anthracite

Granite gray

Anthracite

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CITADIN ® 60 COPING

STRAIGHT COPING

HEIGHT/DEPTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

STANDARD COLORS

DIMENSIONS (IN) 2 3/8 x 11 13/16 x 23 5/8

PBP-426R-10 PBP-426R-15

Gray

6 x 30 x 60 1,67 un/ l.m.

Gray and charcoal DELUXE COLORS

Unit/Lenght Length/row Length/cube

0,51 un/ l.ft

3,6 l.m. 21,6 l.m. 36 units 26 kg 968 kg

11,81 l.ft 70,85 l.ft 6 rows

PBP-426R-02 PBP-426R-03 PBP-426R-21 PBP-426R-24 PBP-426R-25 PBP-426R-50

Ice gray Gray onyx Ivory beige

Qty/cube

Weight/unit avg. Weight/cube

57 lb

Travertine beige Anthracite brown

2130 lb

Black

BULLNOSE COPING AVAILABLE ON REQUEST

HEIGHT/DEPTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

STANDARD COLORS

DIMENSIONS (IN) 2 3/8 x 11 13/16 x 23 5/8

PBP-226R-10 PBP-226R-15

Gray

6 x 30 x 60 1,67 un/ l.m.

Gray and charcoal DELUXE COLORS

Unit/Lenght Length/row Length/cube

0,51 un/ l.ft

3,6 l.m. 21,6 l.m. 36 units 26 kg 968 kg

11,81 l.ft 70,85 l.ft 6 rows

PBP-226R-02 PBP-226R-03 PBP-226R-21 PBP-226R-24 PBP-226R-25 PBP-226R-50

Ice gray Gray onyx Ivory beige

Qty/cube

Weight/unit avg. Weight/cube

57 lb

Travertine beige Anthracite brown

2130 lb

Black

COLORS

Ice gray

Gray onyx

Black

Ivory beige

Travertine beige

Gray

Gray and charcoal

Anthracite brown

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

BULL-NOSED COPING

BULL-NOSED COPING

HEIGHT/DEPTH/LENGTH DIMENSIONS (CM)

SPÉCIFICATIONS

CODES

DELUXE COLORS

DIMENSIONS (IN) 2 3/8 x 11 13/16 x 5 7/8

PBP-201R-02 PBP-201R-50

Ice gray

6 x 30 x 15 6,67 un/ l.m

Black

Unit/Lenght Length/row Length/cube

0,51 un/ l.ft

9 l.m

29,5 l.ft 118,1 l.ft 4 rows 13,45 lb 2643 lb

36,0 l.m 240 units

Qty/cube

Weight/unit avg. Weight/cube

6,1 kg

1200 kg

COLORS

Ice gray

Black

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

TURFSTONE LINIA 100 PAVER

LINIA 100 GRASS PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS Regular Finish

CODES

COLORS

DIMENSIONS (IN) 3 15/16 x 11 13/16 x 17 3/4

PPU-691R-10

Gris

10 x 30 x 45

Units/Surface Qty/row Qty/cube Weight/unit Weight/cube

7,4 / m 2 1,08 m 2 7,56 m 2 17,6 kg 1015 kg

0,69 / ft 2 11,63 ft 2 81,38 ft 2 38,80 lb 2238 lb

7 rows

55% opening area ASTM C1319 standard

COLOR

Gray

PATTERNS

Half paver runner pattern

Checker pattern

Half paver runner pattern with grass

Checker patter with stones

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

TURFSTONE LINIA 100 PAVER

SUMMARY - CONCRETE GRASS PAVERS

DESIGN FOR REDUCING RUNOFF Concrete grass pavers effectively reduce rainwater runoff by pro moting infiltration into the soil, unlike traditional impermeable surfaces. They have a runoff coefficient between 0.2 and 0.4, much lower than surfaces like asphalt. This simulates conditions close to natural spaces, thereby reducing flood risks and allevi ating pressure on drainage systems. Filling the openings with ag gregate further enhances this capability. These pavers represent a sustainable solution for rainwater management while contribut ing to groundwater recharge and ecosystem protection. MAINTENANCE AND USAGE Pavers require normal grass maintenance, such as watering, mowing, weeding, and occasional fertilization. Openings in the pavers can be filled with aggregate in case of intensive use or if the owner prefers not to maintain the grass. COMBATING URBAN HEAT ISLANDS Grass paver surfaces help reduce heat islands by lowering local temperatures, thereby creating more comfortable urban micro climates. Concrete grass paver pavements are a proven solution for cooling urban climates and reducing air pollution.

CONTEXT Urban development promotes urban heat and rainwater run off. Urban heat islands, caused by impermeable pavements and buildings, increase pollution and energy consumption. Runoff erodes waterways and contaminates drinking water sources while reducing groundwater recharge. Concrete grass pavers, de signed to mitigate these effects, allow for water infiltration and cool surfaces. Introduced in Germany in 1961 for parking lots, these pavers have since been used in Europe and North America to limit erosion and support infrastructure such as parking areas, boat ramps, and emergency access routes. PROPERTIES Defined by ASTM C1319 standards, concrete grass pavers mea sure up to 610 x 610 mm (24 in x 24 in) with a minimum thickness of 80 mm (3 1/8 in). They have an average compressive strength of 35 MPa and a water absorption rate of less than 6%, making them resistant to freeze/thaw cycles. These pavers can be grid or scalloped in shape, and their solid surface area ranges from 45% to 75%. DESIGN AND CONSTRUCTION Concrete grass pavers are installed on a compact granular foun dation with a sand or stone screening bedding layer. The open ings can be filled with topsoil and grass or aggregate depending on use. The choice between grass or aggregate in the openings depends on the intended usage intensity. Most grasses require at least five hours of sunlight per day to thrive. Foundations must be thick enough to support loads; typically, the thickness required under asphalt surfaces is adequate for concrete grass pavers. For foundations on poorly drained soils, it is advisable to use a perfo rated plastic drainage pipe wrapped in geotextile to remove water accumulation.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CITADIN ® M80 PERMEABLE PAVER REGULAR FINISH

CITADIN ® M80 PERMEABLE PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS Regular finish

CODES

COLORS

DIMENSIONS (IN)

PPC-419R-02 Ice gray PPC-419R-15 Gray and charcoal

8 x 16,3 x 32,5 3 1/8 x 6 3/8 x 12 13/16 Joint 8mm | Ouverture surface 7,26%

1,76 / ft 2 11,94 ft 2 95,52 ft 2

Units/Surface

18,93 / m 2

Qty/row Qty/cube

1,11 m 2 8,88 m 2

8 rows

Weight/unit avg. Weight/cube

10 kg

22 lb

1643 kg

3622 lb

COLORS

Colors with solar reflectance indices contributing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

Ice gray

Gray and charcoal

PATTERN

Runner pattern

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Compressive strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

50 MPa (7250 psi)

Citadin M80 permeable paver

CSA A231.2

5 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CITADIN TM 80 PAVER REGULAR OR SMOOTH PREMIUM FINISHES

CITADIN TM 80 PAVER - 400 x 600

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

Specifications Regular finish

Codes

Standard Colors

DIMENSIONS (IN) 3 1/8 x 15 3/4 x 23 5/8

PPC-446R-15 Gray and charcoal Deluxe Colors PPC-446R-02 Ice gray PPC-446R-24 Travertine beige

8 x 40 x 60 4,17 / m 2

Unit/Surface Qty/row Qty/cube Weight/unit Weight/cube

0,39 / ft 2 10,33 ft 2 92,97 ft 2

0,96 m 2 8,64 m 2

9 rows

Smooth Premium finish PPC-446R-21 Ivory beige

45 kg

99 lb

1599 kg

3525 lb

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

13,24 m 2

142,5 ft 2

COLORS

Colors with solar reflectance indices contributing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

Gray and charcoal

Ice gray

Travertine beige

Ivory beige

PATTERNS

Pattern 2 Checker pattern (80 x 400 x 600)

Pattern 1 Runner pattern (80 x 400 x 600)

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Compressive strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

50 MPa (7250 psi)

Citadin 80 paver

CSA A231.2

5 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

Cover snow removal tools with Teflon or neoprene protectors to minimize the risk of damage from scratches.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

PRESTIGE TM 80 PAVER PREMIUM FINISHES

PRESTIGE TM 80 PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

COLORS

DIMENSIONS (IN) 3 1/8 x 15 3/4 x 23 5/8

Grenart Premium finish Grenart Premium finish Smooth Premium finish Smooth Premium finish

PPC-546G-11 PPC-546G-55 PPC-546L-11 PPC-546L-55

Granite gray Anthracite Granite gray Anthracite

8 x 40 x 60 4,17 / m 2

Units/Surface

0,39 / ft 2 10,33 ft 2 92,97 ft 2

Qty/row Qty/cube

0,96 m 2 8,64 m 2

9 rows

Weight/unit avg. Weight/cube

45 kg

99 lb

1599 kg

3525 lb

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

13,24 m 2

142,5 ft 2

COLORS

GRENART FINISH

SMOOTH FINISH

Colors with solar reflectance indices contribut ing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

Granite gray

Anthracite

Granite gray

Anthracite

PATTERN

Runner pattern (80 x 400 x 600)

Checker pattern (80 x 400 x 600)

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of pavers resulting from an installation according to these laying patterns.

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Compressive strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

50 MPa (7250 psi)

Prestige 80 paver

CSA A231.2

5 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

Cover snow removal tools with Teflon or neoprene protectors to minimize the risk of damage from scratches.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

HEXAGON TM 80 PAVER SMOOTH PREMIUM FINISH

HEXAGON TM 80 PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

COLORS Ice gray

DIMENSIONS (IN) 3 1/8 x 7 7/8 x 9 1/8

Smooth premium finish Smooth premium finish Smooth premium finish Smooth premium finish Smooth premium finish

PPC-990L-02 PPC-990L-11 PPC-990L-21 PPC-990L-25 PPC-990L-50

8 x 20 x 23 28,57 / m 2

Granite gray Ivory beige

Units/Surface

2,7 / ft 2 10,44 ft 2 104,4 ft 2

Anthracite brown

Qty/row Qty/cube

0,97 m 2 9,7 m 2

10 rows

Black

Weight/unit avg. Weight/cube

6 kg

14 lb

1792 kg

3943 lb

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

5,77 m 2

62,1 ft 2

COLORS

Colors with solar reflectance indices con tributing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

Ice gray

Granite gray

Black

Ivory beige

Anthracite brown

PATTERN

Runner pattern (20 x 23)

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of pavers resulting from an installation according to these laying patterns.

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Compressive strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

50 MPa (7250 psi)

Hexagon 80 paver

CSA A231.2

5 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

Cover snow removal tools with Teflon or neoprene protectors to minimize the risk of damage from scratches.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CITADIN ® M80 PAVER REGULAR OR SMOOTH PREMIUM FINISHES

CITADIN ® M80 PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS Regular finish

CODES

STANDARD COLORS

DIMENSIONS (IN) 3 1/8 x 6 3/8 x 12 13/16 3 1/8 x 12 13/16 x 12 13/16 3 1/8 x 12 13/16 x 19 3/16

PPC-411R-10 Gray PPC-411R-15 Gray and charcoal DELUXE COLORS PPC-411R-02 Ice gray PPC-411R-03 Gray onyx PPC-411R-24 Travertine beige PPC-411R-50 Black

A

A 8 x 16,3 x 32,5 B 8 x 32,5 x 32,5 C 8 x 32,5 x 48,8

Units/Surface

9,92 / m 2 1,11 m 2 8,88 m 2

0,92 / ft 2 11,94 ft 2 95,52 ft 2

B

Qty/row Qty/cube

8 rows

Weight/unit avg. Weight/cube

20 kg

44 lb

PPC-411L-21

Ivory beige

Smooth premium finish

1643 kg

3622 lb

C

Sold together

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

5,28 m 2

56,8 ft 2

SUPRA CITADIN ® M80 PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS Regular finish

CODES

STANDARD COLORS

DIMENSIONS (IN) 3 1/8 x 19 3/16 x 32

PPC-412R-10 Gray PPC-412R-15 Gray and charcoal DELUXE COLORS PPC-412R-02 Ice gray PPC-412R-24 Travertine beige PPC-412R-50 Black PPC-412L-21 Ivory beige

D 8 x 48,8 x 81,3

D

0,23 / ft 2 8,52 ft 2 68,20 ft 2

Units/Surface

2,52 / m 2 0,79 m 2 6,34 m 2

Qty/row Qty/cube

8 rows

Weight/unit avg. Weight/cube

73 kg

161 lb

1200 kg

2640 lb

Smooth premium finish

Sold separately

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

10,09 m 2

108,6 ft 2

CITADIN ® M80 SMALL RECTANGLE PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS Regular finish

CODES

STANDARD COLOR

DIMENSIONS (IN) 3 1/8 x 6 3/8 x 12 13/16

PPC-413R-10 Gray

E

E 8 x 16,3 x 32,5

DELUXE COLORS PPC-413R-25 Anthracite brown PPC-413R-50 Black PPC-413L-21 Ivory beige

Units/Surface

18,93 / m 2

1,76 / ft 2 11,94 ft 2 95,52 ft 2

Qty/row Qty/cube

1,11 m 2 8,88 m 2

8 rows

Smooth premium finish

Weight/unit avg. Weight/cube

10 kg

22 lb

1643 kg

3622 lb

Sold separately

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

3,61 m 2

38,9 ft 2

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CITADIN ® M80 PAVER REGULAR OR SMOOTH PREMIUM FINISHES

COLORS

Ice gray

Gray onyx

Black

Ivory beige

Travertine beige

Gray

Gray and charcoal

Colors with solar reflectance indices contributing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

Anthracite brown †

PATTERNS

Pattern 6 Modular pattern

Pattern 1 Supra checker pattern

Pattern 2 Runner pattern

Pattern 3 Runner pattern

Pattern 4 Modular pattern

Pattern 5 Modular pattern

3% Citadin M80 (80x163x325) 6% Citadin M80 (80x325x325) 7% Citadin M80 (80x325x488) 83% Supra Citadin M80 (80x488x813)

16% Citadin M80 (80x163x325) 32% Citadin M80 (80x325x325) 36% Citadin M80 (80x325x488) 15% Supra Citadin M80 (80x488x813)

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of pavers resulting from an installation according to these laying patterns.

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Compressive strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

50 MPa (7250 psi)

Citadin M80 paver

CSA A231.2

5 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

Cover snow removal tools with Teflon or neoprene protectors to minimize the risk of damage from scratches.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

RICHELIEU TM M80 PAVER CARVED FINISH

RICHELIEU TM M80 PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

STANDARD COLORS

DIMENSIONS (IN) 3 1/8 x 6 3/8 x 12 13/16 3 1/8 x 12 13/16 x 12 13/16 3 1/8 x 12 13/16 x 19 3/16

PPC-310R-13 PPC-310R-15 PPC-310R-35 PPC-310R-02 PPC-310R-24 PPC-310R-50

Sandy gray

A

A 8 x 16,3 x 32,5 B 8 x 32,5 x 32,5 C 8 x 32,5 x 48,8

Gray and charcoal Ashen beige DELUXE COLORS

Units/Surface

9,92 / m 2 1,11 m 2 8,88 m 2

0,92 / ft 2 11,94 ft 2 95,52 ft 2

Ice gray

B

Qty/row Qty/cube

Travertine beige

8 rows

Black

Weight/unit avg. Weight/cube

20 kg

44 lb

1643 kg

3622 lb

C

Sold together

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

5,28 m 2

56,8 ft 2

SUPRA RICHELIEU TM M80 PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

STANDARD COLORS

DIMENSIONS (IN) 3 1/8 x 19 3/16 x 32

PPC-312R-13 PPC-312R-15

Sandy gray

D 8 x 48,8 x 81,3

Gray and charcoal DELUXE COLOR Travertine beige

D

0,23 / ft 2 8,52 ft 2 68,20 ft 2

Units/Surface

2,52 / m 2 0,79 m 2 6,34 m 2

Qty/row Qty/cube

PPC-312R-24

8 rows

Weight/unit avg. Weight/cube

73 kg

161 lb

1200 kg

2640 lb

Sold separately

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

10,09 m 2

108,57 ft 2

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

RICHELIEU TM M80 PAVER CARVED FINISH

COLORS

Gray and charcoal

Black

Sandy gray

Ice gray

Travertine beige

Ashen beige

Colors with solar reflectance indices contributing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

PATTERNS

Pattern 6 Modular pattern 3% Richelieu M80 (80 x 163 x 325) 6% Richelieu M80 (80 x 325 x 325) 7% Richelieu M80 (80 x 325 x 488) 83% Supra Richelieu M80 (80 x 488 x 813)

Pattern 5 Modular pattern 16% Richelieu M80 (80 x 163 x 325) 32% Richelieu M80 (80 x 325 x 325) 36% Richelieu M80 (80 x 325 x 488) 15% Supra Richelieu M80 (80 x 488 x 813)

Pattern 1 Supra runner pattern

Pattern 2 Runner pattern

Pattern 3 Supra runner pattern

Pattern 4 Modular pattern

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of pavers resulting from an installation according to these laying patterns.

INFORMATIONS TECHNIQUES

Resistance to freeze-thaw cycles in a saline solution

Compressive strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: -1 mm to +2 mm (-1/32 in to + 5/64 po)Width: -1 mm to +2 mm (-1/32 in to + 5/64 po)Height: ±3 mm (±1/8 po)

50 MPa (7250 psi)

Richelieu M80 Paver

CSA A231.2

5 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

Cover snow removal tools with Teflon or neoprene protectors to minimize the risk of damage from scratches.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

LINIA TM 100 PAVER REGULAR FINISH

LINIA TM 100 PAVER MODULE 10

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

COLORS

DIMENSIONS (IN) 3 15/16 x 3 15/16 x 17 3/4

PPC-710R-10 PPC-710R-50

Gray Black

10 x 10 x 45 22,2 / m 2

Units/Surface

2,06 / ft 2 8,72 ft 2 61,04 ft 2

Qty/row Qty/cube

0,81 m 2 5,67 m 2

7 rows

Weight/unit avg. Weight/cube

11 kg

24 lb

1372 kg

3019 lb

Sold separately

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

2,20 m 2

23,7 ft 2

LINIA TM 100 PAVER MODULE 20

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

COLORS

DIMENSIONS (IN) 3 15/16 x 7 7/8 x 23 5/8

PPC-720R-10 PPC-720R-50

Gray Black

10 x 20 x 60

Units/Surface

8,3 / m 2 0,96 m 2 6,72 m 2

0,77 / ft 2 10,33 ft 2 72,33 ft 2

Qty/row Qty/cube

7 rows

Weight/unit avg. Weight/cube

28 kg

62 lb

1607 kg

3536 lb

Sold separately

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

4,00 m 2

43,0 ft 2

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

LINIA TM 100 PAVER REGULAR FINISH

COLORS

Gray

Black

PATTERNS

Pattern 5 Runner pattern Module 10 et 20

Pattern 4 Runner pattern Module 10 et 20

Pattern 1 Runner pattern 1/2

Pattern 2 Runner pattern 1/3

Pattern 3 Runner pattern Module 10 et 20

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of pavers resulting from an installation according to these laying patterns.

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Compressive strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

50 MPa (7250 psi)

Linia 100 paver

CSA A231.2

5 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

Cover snow removal tools with Teflon or neoprene protectors to minimize the risk of damage from scratches.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CITADIN TM 60 SMALL SQUARE PAVER SMOOTH PREMIUM FINISH

CITADIN TM 60 SMALL SQUARE PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

Codes

Colors

DIMENSIONS (IN) 2 3/8 x 3 15/16 x 3 15/16

Smooth premium finish

PPR-450L-02 Ice gray PPR-450L-11 Granite gray PPR-450L-21 Ivory beige PPR-450L-25 Anthracite brown PPR-450L-50 Black

6 x 10 x 10 100,0 / m 2 0,88 m 2 5,28 m 2

Unit/Surface Qty/row Qty/cube Weight/unit Weight/cube

9,3 / ft 2 9,5 ft 2 56,8 ft 2

6 rows

1,4 kg 775 kg

3,1 lb

1705 lb

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

3,72 m 2

40,0 ft 2

PREMIUM COLORS

Colors with solar reflectance indices con tributing to the LEED program in order to reduce the creation of heat islands in urban areas as much as possible.

Ice gray

Granite gray

Black

Ivory beige

Anthracite brown

PATTERNS

Pattern 1 Checker pattern

Pattern 2 Runner pattern

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of pavers resulting from an installation according to these laying patterns.

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Compressive strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

50 MPa (7250 psi)

Citadin 60 small square paver

CSA A231.2

5 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

Cover snow removal tools with Teflon or neoprene protectors to minimize the risk of damage from scratches.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

OPUS ® 60 PAVER

OPUS ® 60 PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

COLORS

DIMENSIONS (IN) 2 3/8 x 3 15/16 x 7 7/8

PPR-850R-50 PPR-850R-25

Anthracite gray Anthracite brown

6 x 10 x 20 44,4 / m 2

Units/Surface Surface/Units

4,13 / ft 2 0,2153 ft 2 10,34 ft 2 124,1 ft 2

0,02 m 2 0,96 m 2 11,53 m 2 2,9 kg 1600 kg

Qty/row Qty/cube

12 rows

Weight/unit avg. Weight/cube

6,4 lb

3500 lb

Many pavers have a different surface imprint for a small carved stone appearance

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

2,88 m 2

31,0 ft 2

COLORS

Anthracite gray

Anthracite brown

PATTERNS

Pattern 1 Herringbone pattern

Pattern 2 Runner pattern

Pattern 3 Basket weave pattern

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of pavers resulting from an installation according to these laying patterns.

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Compressive strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

50 MPa (7250 psi)

Opus 60 Paver

CSA A231.2

5 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

Cover snow removal tools with Teflon or neoprene protectors to minimize the risk of damage from scratches.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA

CITADIN ® 60 CLASSIC PAVER REGULAR FINISH

CITADIN 60 ® CLASSIC PAVER

HEIGHT/WIDTH/LENGTH DIMENSIONS (CM)

SPECIFICATIONS

CODES

COLORS

DIMENSIONS (IN) 2 3/8 x 3 15/16 x 7 7/8

PPR-880R-10 PPR-880R-51

Gray Black

6 x 10 x 20

Units/Surface

50 / m 2 0,96 m 2 11,53 m 2 2,9 kg 1610 kg

4,7 / ft 2 10,3 ft 2 124,1 ft 2 6,4 lb 3540 lb

Qty/row Qty/cube

12 rows

Weight/unit avg. Weight/cube

Approximate coverage areas for one bag of polymeric sand ( 22,7 kg )

6,43 m 2

69,2 ft 2

COLORS

Gray

Black

PATTERNS

Pattern 1 Herringbone pattern

Pattern 2 Runner pattern

Pattern 4 Basket weave pattern

The layout shown in the above illustration is for information purposes only. Bolduc disclaims all responsibility for the excess or lack of pavers resulting from an installation according to these laying patterns.

TECHNICAL INFORMATIONS

Resistance to freeze-thaw cycles in a saline solution

Compressive strength

Product

Standard

Water absorption

Dimensional tolerances

Maximum loss of initial weight in a saline solution (NaCl 3 %) :

Length: Width: Height:

-1 mm to +2 mm (-1/32 in to + 5/64 in) -1 mm to +2 mm (-1/32 in to + 5/64 in)

50 MPa (7250 psi)

Citadin 60 Classic Paver

CSA A231.2

5 % maximum

225 g/m 2 (0,74 oz / ft 2 ) after 28 cycles 500 g/m 2 (1,64 oz / ft 2 ) after 49 cycles

±3 mm (±1/8 in)

Cover snow removal tools with Teflon or neoprene protectors to minimize the risk of damage from scratches.

CANADA : 1 800 463-8966 USA : 1 800 603-5567 WWW.BOLDUC.CA