Installation guide - 26

ESSENTIALS

ESSENTIALS COLLECTION GENERAL INSTALLATION GUIDE FOR FIREPIT:

Each fireplace has a different number of blocks depending on the fireplace model and the blocks chosen. However, the firebox and spark arrestor are the same.

Prepare a standard bedding layer (see the generic instructions for slabs or pavers on page 5). Level the area where the fireplace will be installed (a drainage slope is not necessary).

Install the fireplace block units in the desired location, following the installation instructions specific to each type of fireplace. If the fireplace is being installed in a paved area, lay the slabs or pavers around the fireplace, making any necessary cuts. Install the fireplace insert in the designated opening and place it on the edges of the blocks or coping stones already installed. For the bottomless steel firebox (wood-burning fireplace), place 3/4” clean stone in the bottom of the firebox, up to the bottom of the metal insert (stone depth: 245 mm or 9 5/8”). This step is crucial to protect the concrete blocks from the intense heat of the fire when the metal insert does not completely cover the blocks.

Volume 26 BOLDUC Installation Guide - 55

Made with FlippingBook - professional solution for displaying marketing and sales documents online